Toys, stationery and other plastic products and leather, furniture and other printing inks

【Scope of application】

Suitable for various soft and hard PVC plastic products, such as toys, stationery, leather, furniture, etc., complying with the EU Toy Safety Directive EN-71 and azo-free, low-phenol standards and other requirements

【Product Features】

1. The ink layer has a certain stretchability and is relatively soft. It is not easy to break when the ink layer is thick.

2. Excellent printability and can be used stably for a long time

3. Good adhesion, scratch resistance and wear resistance, suitable for continuous multi-layer color printing and high-speed printing

4. Strictly selected high-quality pigments with excellent weather and heat resistance

【Specifications】

1. Viscosity range: 15~40 seconds (Zahn 3# / 25℃)

2. The weather resistance and heat resistance range is between level 6 and level 8 (level 1 is the worst and level 8 is the best)

[Ink color system]

1. For the color system of this series of products, please refer to the ink color card in the color card navigation of our company.

2. If you need to prepare special colors and characteristics of each color, please contact our sales staff

[Packaging specifications]

White ink: 20KG/barrel; 220KG/barrel

Colored ink: 18KG/barrel

【Precautions】

1. Stir the original ink moderately before mixing to ensure that the ink is even. After adjusting the ink, use diluent to dilute the ink to the desired consistency.

Industry viscosity.

2. When preparing diluent, you should choose a solvent with good compatibility with the ink to avoid instability caused by reduced solubility of the ink, such as high viscosity, layered and floating colors, etc., which may lead to abnormal reactions in the printed product.

3. When using this product, avoid mixing inks or thinners from other brands to ensure that the basic physical properties of the product are consistent.

Affected.

4. The valid shelf life of unopened products is 6 months.

5. When the product is unsealed and not used up, the lid must be closed tightly to avoid ink contamination or abnormal phenomena due to volatilization of effective substances in the formula or debris falling into the ink.

6. The suitable temperature should be 10℃~35℃.

【Notice to users】

*This content is based on our company's actual production and test results. The above data is for reference only and does not have legal guarantee effect. Whether the performance of the ink product meets your company's requirements depends on the actual application conditions, printing materials, etc. Because the actual application conditions and storage conditions of your ink products are beyond our control, our company recommends that before using our ink products for printing, users must fully understand whether the application conditions of each product are fully met, and Test on an individual basis to ensure it meets your company's needs. If you want to know more about product information, please contact our sales staff.